8-Function Electric ICU Chair Bed

BT-AE029

Features:
1) Overallsize (L*W*H):2230*1050*500-1000mm, bed platform size:1960*900mm
2) Bed base:cold-rolled steel sheet,Top coat: electrostatic powder coating
3) Detachable ABS headboard/footboard, insert type
4) 4-part steel bedboards, backrest for x-ray and equipped with inside mattress
5) Detachable ABS handrails, each side two pieces, Embedded controllers on two side rails on footside with angle indicator for Trendelenburg & anti-Trendelenburg, two side rails on head side with angle indicator for backrest.
6) Linak motors with backup batteries
7) Weighing function, accuracy optional: 0.02KG
8) Alarm system: once patients get out of bed, the alarm works
9) There are manual cpr handles for backrest only, and electric cpr buttons for putting bed flat in one time.
10) Guard bumper wheels at each corner of bed
11) Grap handles at the end of head side, stainnless steel material, detachable
12) Central-controlled braking system, four silent wheels, φ125mm;
13) With fifth wheel, controlled by foot pedal
14) Standard accessories: I.V pole with 4 hooks 1pc, IV pole holes 2pcs, Drainage hooks 2pcs, mattress 12cm thickness for full length 1pc, inside mattress 6cm thickness for backest 1pc,stretcher dinning board on side rail
15) Weight load:300kg

8-function:
1) Backrest max upward angle: 75°
2) Footrest max upward angle: 40°
3) Height adjustment: 500-1000mm
4) Trendelenburg: 12°
5) Anti-trendelenburg: 12°
6) Weighing function
7) Cardiac chair position function

8) Electric height stretchable function:200mm

BED ESTRUCTURE

Structure made of steel

The chassis of the bed must be covered with ABS and / or Polypropylene

Translucent backrest to X-rays, equipped with support for X-ray chassis (chest plate) Under the backrest, lateral approach.

Surface of four planes that allow the bed to adopt the desired positions (according to what is specified in numeral 3 of this table).

With protectors or bumpers in the four corners.

Removable header and footboard, made of ABS, and / or Polypropylene, easy to install and disassemble without the need for a tool.

Supports for physiological drainage bags on both sides of the bed.

With backup battery

With two I.V. ROD & Drainage hook

Scale integrated to the bed

MEASURES AND CAPACITY OF BED

Total load capacity of 227 kg or greater

That allows height adjustment from 55 cm or less up to 75 cm or greater (measured from the floor to the bed platform without a mattress)

Bed width of 95 cm or greater

Length of the bed of 215 cm or greater

POSITION ADJUSTMENTS

Adjustment of height and positions with electric controls of integral control in both braziers

Adjustment of positions: Fowler, Semifowler, trendelenburg (O vascular) and trendelenburg inverted (or tiltable).

Knee flexion adjustment

With armchair or cardiac chair position system

Automatic CPR positioning

Indicator of the degrees of inclination of the integrated backrest, on the side rails of the headboard area

DISPLACEMENT AND SECURITY SYSTEM

Four security rails, which materials and independent. Two in the header area and two in the footboard or lateral area

system that allows raising and lowering the guardrails

With four more wheels with free rotation on its axis

With braking system and central locking of the four wheels

Diameter of the wheels: 4.5 inches or more

Each wheel has a design that does not accumulate waste.

With fifth wheel system to facilitate the maneuverability of the bed.

In the bed it must be washable, resistant to hospital disinfection protocols.

ELECTRIC SYSTEM

Electrical connection 110-120 volts AC with 60 Hz

Electrical system must be protected from short circuit due to the risk of humidity

ACCESORIES

Anti-bed mattress with air control system and redistribution of pressure, X-ray translucent, of the same brand as the bed. With adequate measures to the base of the bed (length, width and height) that allow to realize the different postures And that the height does not surpass the safety railings

With two I.V. ROD & Drainage hook with 4 hooks, which is an integral part of the bed

At least one container or support For type E oxygen cylinder that is an integral part of the bed.

Removable monitor holder platform, which is an integral part of the bed.